Audiolab is back in the standalone phono stage business after almost twenty years, and the PPA7 does not return quietly. For £499 in the UK — $699 in the US, €599 in Europe, A$1,099 in Australia — it pairs proper MM/MC cartridge matching with a 600 mW headphone amplifier, Bluetooth 5.3 transmission with aptX HD, and USB-C recording up to 24-bit/192kHz. It went on sale in late October 2026 and is already in stock in both finishes. No independent review or measurement exists yet, so this is a paper analysis, not a listening verdict.

What’s New

The box is familiar Audiolab: a 208 × 56 × 180 mm aluminium chassis shared with the D7 DAC, a 33 mm OLED display between two rotary controls, a remote in the box, and a black or silver finish. At 1.42 kg it sits beside the D7 or in a 6000 or 7000 Series rack.

Audiolab PPA7 phono preamplifier in black and silver finishes side by side, front panels with OLED displays

At its core is a dedicated analogue phono stage with separate RCA input pairs for MM and MC. MM gets the standard 47 kΩ impedance with 100 pF or 220 pF capacitance; MC gets 100 Ω or 330 Ω resistive loading. Gain adjusts in 1 dB steps over ±6 dB, from +46 dB (MM) and +60 dB (MC) to 52 dB and 66 dB at the top. Audiolab quotes THD below 0.003%, 80 dB A-weighted signal-to-noise, and a 20 Hz–20 kHz response within ±0.5 dB. The RCA output runs fixed or variable, so it can drive a power amp or active speakers directly. A 12 V DC supply feeds separately regulated ±8.5 V rails.

Rear panel of the silver Audiolab PPA7 showing MM and MC phono inputs, PRE output, Bluetooth antenna, USB and 12V trigger connections

The front panel carries a 6.35 mm headphone output driven by a current-feedback amplifier rated up to 600 mW into loads from 20 to 600 Ω — real power for a phono stage, enough for most full-size headphones without a separate amp.

An ADC sits behind the extras. Bluetooth 5.3 transmits to wireless headphones or speakers with aptX HD — note the direction: a transmitter, not a receiver, so it will not take music from a phone. The USB-C output records to a PC or Mac at 16 or 24 bits, 44.1 to 192 kHz, with recording level adjustable from −12 dB to +3 dB to keep hot pressings from clipping. A USB-A port handles firmware updates, and 12 V trigger ties power to the rest of the system.

Silver Audiolab PPA7 on a desk beside a turntable and a laptop, set up for recording vinyl to a computer

Specification Detail
Phono inputs MM and MC RCA pairs
MM loading 47 kΩ, selectable 100 pF / 220 pF
MC loading Selectable 100 Ω / 330 Ω
Gain +46 dB (MM) / +60 dB (MC), ±6 dB; max 52 / 66 dB
THD <0.003% (1 kHz)
Signal-to-noise 80 dB A-weighted (MM and MC)
Frequency response 20 Hz–20 kHz (±0.5 dB)
Headphone output 6.35 mm, up to 600 mW, 20–600 Ω
Bluetooth 5.3 transmitter, aptX HD
USB recording USB-C, 16/24-bit, 44.1–192 kHz
Outputs Fixed/variable RCA, Bluetooth, headphone
Dimensions 208 × 56 × 180 mm
Price £499 / $699 / €599 / A$1,099

Context

Audiolab’s last standalone phono stage predates the vinyl revival. The company spent the intervening two decades on integrated amplifiers and DACs, and the PPA7 arrives under the International Audio Group — shown at the Warsaw Audio Video Show in late October beside the D7 DAC, the two billed as companions. The D7 sells for £449, so the pair runs just under £950.

The category has stayed conservative: most phono stages at this price do one thing. The PPA7’s bet is that vinyl listeners in 2026 also want headphones, wireless, and a way to archive records — in one box rather than three.

Compared to Predecessors and Current Rivals

Model Price vs PPA7 Verdict
iFi Zen Phono 3 $249 MM/MC, 36–72 dB gain, 4.4 mm output, subsonic filter Half the price, a purer phono stage; no headphone amp, Bluetooth or recording
Schiit Skoll F $399 MM/MC, remote, balanced output option Closer in price, still phono-only
Pro-Ject Phono Box S3 B $499 Balanced MM/MC The purist alternative; no headphone amp, Bluetooth or recording
MoFi UltraPhono $499 MM/MC plus a headphone amp Closest rival on features; no Bluetooth or USB recording

My Take

On paper, this looks promising — Audiolab got the phono core right first: separate MM and MC inputs, real loading choices, ±8.5 V rails, and published numbers (80 dB signal-to-noise, under 0.003% THD) that are at least honest about being manufacturer figures. The extras are not gimmicks: a 600 mW headphone amp and USB recording to 24-bit/192kHz are genuinely useful, and the variable output lets the box anchor a minimal system on its own.

What concerns me is the Bluetooth chain. The analogue signal has to be digitised and compressed to reach wireless headphones, aptX HD or not — the cartridge has not become digital, but what reaches your ears has. That is a fair trade for convenience, but I would not judge the phono stage through a Bluetooth link. The other open question is value: $699 buys a lot of phono stage if you never use the extras, and the specs list no subsonic filter, which the cheaper iFi includes.

Until someone measures one, this is paper analysis. But the combination is well judged: Audiolab read how people actually listen to vinyl now — headphones at night, wireless in the kitchen, and a digital copy of the record — and built one box for it.

Who Should Watch This

Desktop headphone listener with a turntable? The PPA7 is the one-box answer — cartridge in, headphones out, no separate amp in between. Archiving rare records? The USB recording at 24-bit/192kHz is the reason to buy. Building a compact Audiolab system? Pair it with the D7 for analogue and digital in two boxes. If all you need is a phono stage, wait: the iFi Zen Phono 3 at $249 or the Schiit Skoll F at $399 do the core job for less. And if the deck itself is the upgrade, I wrote about Audio-Technica’s AT-LPA2 recently — a turntable this phono stage would suit.

LEAVE A REPLY

Please enter your comment!
Please enter your name here