Vinnie Rossi has completed the CANTA range. The CANTA Preamplifier and CANTA Stereo Power Amplifier, announced November 16, turn the $23,995 CANTA Integrated Amplifier’s recipe into a two-box system: a Class A linestage built around 6SN7 triodes, feeding a dual-mono Class AB power amp rated at 125 watts per channel into 8 ohms. Pricing is still to be confirmed, with no ship date given — a design story for now, not a buying decision.
What’s New
The CANTA Preamplifier is a dual-mono, Class A linestage that uses one 6SN7 triode per channel purely for voltage gain — the same arrangement as the integrated, now with its own chassis and power supply. Volume runs through a 100-step precision resistor-ladder control. Inputs are balanced XLR and single-ended RCA, with gain adjustable for each input, and there is a home theatre bypass for multichannel systems. A high-resolution display sits between the knobs, and a machined aluminium remote comes in the box.

The matching CANTA Stereo Power Amplifier is rated at 125 watts per channel into 8 ohms and 250 into 4 ohms, and it stays stable into loads as low as 2 ohms. Its dual-mono Class AB output stage uses just two pairs of precision-matched lateral MOSFETs per side, on a two-PCB stack that puts the balanced input and driver stages above the output stages to keep signal paths short. Instead of a conventional transformer, a custom switch-mode supply with active power factor correction delivers 1,200 watts of peak power from its own shielded chamber. The front panel carries just two pushbuttons for power, muting and menu functions, and a 3.5 mm trigger links it to the preamplifier.

Both boxes share the CANTA construction: a solid AL6061 aluminium billet, precision-machined into a seamless enclosure, then bead-blasted and anodised. The aluminium body doubles as a heatsink, with the MOSFETs mounted directly to it, and provides shielding, grounding and vibration resistance. No DAC, no streamer, no phono stage in either box — analogue only, by design, exactly as with the integrated.

Context
CANTA is a new branch of the Vinnie Rossi family, not a continuation of the flagship BRAMA line — whose preamplifier, built around Western Electric WE300B directly heated triodes, costs $38,995. The range opened in August with the CANTA Phono Preamplifier ($17,995), a discrete-JFET MM/MC stage shown at the Hong Kong and Taipei shows, shipping from the end of September. The CANTA Integrated Amplifier followed in October at $23,995, shipping from late October. The preamplifier and power amplifier were slated for October and November; both arrived together on November 16, completing the four-model range in three months.
Rossi founded the brand in 2014 with the LIO platform — a modular system built around ultracapacitor power — and the L2 Signature line followed in 2018. CANTA is the first range built from the ground up as a family: one chassis, one design language, four boxes, all made in the USA. The integrated carries a ten-year warranty; none has been published yet for the two new boxes.
Compared
With pricing still unpublished, the honest comparison is against what the money is known to buy.
| System | What it is | Key points | Combined price |
|---|---|---|---|
| Vinnie Rossi CANTA Preamplifier + Stereo Power Amplifier | Tube preamp + MOSFET power amp | 6SN7 Class A linestage; 125 W MOSFET, stable to 2 Ω | Pricing TBC |
| McIntosh C2800 + MC312 | Tube preamp + solid-state power amp | 12AX7/12AT7 tubes, DAC, phono, headphone; 300 W Autoformer power | $10,500 + $8,500 = $19,000 |
| Vinnie Rossi CANTA Integrated Amplifier | One-box hybrid | Same 6SN7 linestage + 125 W MOSFET stage; four inputs | $23,995 |
The McIntosh pairing is the established rival: a tube preamp with DAC, configurable phono and a headphone amp, plus 300 watts a channel, for a known $19,000. The CANTA separates answer with a simpler signal path, a matched chassis and the 6SN7 voicing — but they carry no DAC, no phono and no headphone output, and their price is unknown. The in-family rival is sharper: the CANTA Integrated has the same tube stage and 125 watts in one box for $23,995. The separates have to justify themselves on the dual-mono separation, the dedicated power supplies and the 1,200-watt peak supply in the power amp. McIntosh’s own all-tube integrated, the MA2375 at $15,000, shows how far one chassis can go for less.
My Take
Paper analysis — I have not heard this pair; no independent listening tests or measurements exist yet.
What I like most is the discipline: two boxes, one design language, per-input gain set from the listening seat, and a power amp stable to 2 ohms with a serious switch-mode supply behind it. The analogue-only stance is a genuine choice, not a missing feature — buyers at this level usually own their sources already. What concerns me is the blank where the price should be. The integrated at $23,995 sets a ceiling the separates have to stay near; above it, the case for splitting the boxes gets thin, and below it, the integrated looks overpriced. Until the numbers appear, the value argument cannot be made at all. And the 6SN7 stage invites the usual tube-rolling curiosity — part of the appeal of a tube preamp, and part of its running cost. For now this is a promising design with an unfinished price tag.
Who Should Watch
Vinyl listeners who already own the CANTA Phono Preamplifier — this pair is the rest of their system. Buyers who want separates over the integrated and value the dual-mono layout. Anyone building a full CANTA system around sources they already own. Not for anyone who needs a price today, anyone who wants digital or streaming built in, or headphone listeners — the pair has no headphone output.











































