Onkyo has put a price and a date on its return to desktop headphone audio. The HA-70, a fully balanced headphone amplifier with two ESS ES9039Q2M DAC chips inside, will sell for $649.99 in the US when it arrives in spring 2027. Announced on November 13, 2026, in Onkyo’s 80th anniversary year, it is a compact aluminum box — 180 by 141 by 46 mm — built for a desktop system and drives anything from sensitive in-ear monitors to 600-ohm reference headphones. The catch, and it is a real one, is what Onkyo has not said yet: the release publishes no output power figure and does not name the headphone connectors.
What’s New
The headline is the signal path. The HA-70 runs a fully balanced architecture from DAC to headphone output, with a dedicated DAC and amplifier stage for each channel. At its heart are two ESS ES9039Q2M SABRE converters — one per channel — paired with Onkyo’s own analog circuitry. The USB side runs on an XMOS XU316 interface, supporting PCM playback up to 768 kHz and DSD256 over DoP. On paper that is a serious digital front end for the price: two current-generation ESS chips and a modern XMOS interface in a $649.99 box.
Versatility is the other half of the pitch. A three-stage gain switch covers the whole headphone range: Ultra Low Gain for in-ear monitors, Low Gain for low-impedance headphones, and High Gain for demanding models up to 600 ohms. The idea is that one amplifier should serve an entire collection without hiss on sensitive earphones or a shortage of drive on hard loads — though Onkyo has published no noise floor for the Ultra Low setting, so the IEM claim is untested for now.

Connectivity covers the usual desktop sources: USB-C, optical and coaxial digital inputs, plus RCA connections and balanced XLR outputs for feeding the HA-70 into a wider system. The front panel keeps things plain — a large central volume knob with a red marker, input and gain indicators, and a headphone output on either side of the knob. The aluminum chassis is deliberately small, a desktop footprint rather than a full-width component, and the press photo shows a glass-topped case with the internals faintly visible beneath.

Context
The HA-70 is not Onkyo’s first headphone DAC — the company sold the portable DAC-HA200 and DAC-HA300 in the mid-2010s — but it is the first desktop headphone amplifier of the new era. Onkyo was founded in 1946, filed for bankruptcy in May 2022, and is now owned by Premium Audio Company, a wholly owned subsidiary of US-based Gentex Corporation, which completed its acquisition of VOXX in April 2025. The 80th anniversary year has already produced the Muse network amplifiers, the Y-50 at $1,499 and the Y-40 at $999, shown at CES in January 2026. The HA-70 extends that anniversary line into personal audio, at a price well below the Muse pair.
Compared
The obvious rival is the one What Hi-Fi? picked: Audiolab’s D7, a desktop DAC and headphone amplifier listed at $699 in the US. The two take different approaches. The HA-70 runs two ES9039Q2M chips against the D7’s single ES9038Q2M, and its fully balanced topology is something the D7 does not offer — the D7 has a single-ended 6.35 mm headphone socket and no balanced headphone output. The D7 answers with DSD512 over USB against the HA-70’s DSD256 ceiling, plus Bluetooth 5.1, which Onkyo does not mention. At $649.99 the HA-70 undercuts the D7 by about $49. One caution on the comparison itself: the D7’s own headphone power figure is disputed — HiFi Pig lists up to 600 mW across 20 to 600 ohms, Audio Advisor lists 500 mW, and Audiolab’s own US product page lists no maximum headphone power — so neither unit can yet be judged on watts. Against its own history, the HA-70 is a different animal from the old portable DAC-HA models: a mains-powered desktop component, not a pocket DAC for a phone.
My Take
Paper analysis — I have not heard the HA-70, and no independent listening impressions or measurements exist yet; the unit is not due until spring 2027. The parts list is honest value for $649.99: two current ESS chips, an XMOS XU316 interface, a balanced path and a three-stage gain switch are a credible combination at this price, and the compact aluminum chassis looks the part. But the missing numbers matter more than the present ones. Output power into real loads and the headphone connector types are the two facts that decide whether a buyer’s headphones will work with this amplifier at all, and Onkyo has published neither. “Fully balanced” describes a circuit topology, not a measured result, and it cannot be checked until Onkyo publishes power, noise and distortion figures. The spring 2027 date leaves time for both: Onkyo to fill in the gaps, and reviewers to measure the unit. My advice is to wait for those figures before ordering — and to check, when they arrive, the output power into your own headphones first.
Who Should Watch
Desktop listeners with a mixed headphone collection should look first — the three gain stages are aimed squarely at someone who owns both sensitive in-ears and a demanding full-size pair. Onkyo and Heritage owners building a matching desk setup should put it on the shortlist, and anyone comparing sub-$700 desktop DAC/amps should weigh it against the Audiolab D7 on the two questions that matter: balanced output against wider format support. If you need Bluetooth, a published power figure today, or a headphone amp before spring, this is not your box — and if your headphones terminate in a balanced connector, confirm the HA-70 has the socket to match before spending anything.











































