Kanto’s Yu series has been the default one-box speaker system for almost a decade, and the second generation is finally on sale. The Yu6 G2 and Yu4 G2 powered bookshelf speakers go on sale in North America on November 16 at $549.99 and $449.99, with passive versions at $349.99 and $249.99. The headline change is DSP — a first for the Yu range — alongside re-engineered drivers and roughly 30% more RMS power. International availability, including Australia, follows in mid-December.
What’s New
The drivers are the most visible change. The Kevlar cones of the originals are gone, replaced by abaca-reinforced paper cone woofers, while the 1-inch silk dome tweeters carry over. The larger Yu6 G2 runs a 5.25-inch woofer with 130W RMS and 200W peak, with a specified response of 55Hz to 22kHz. The smaller Yu4 G2 uses a 4-inch woofer with 110W RMS and 160W peak, quoted at 60Hz to 22kHz. Against the first generation, that is 100W to 130W RMS on the Yu6 and 70W to 110W on the Yu4, with the top end up from 20kHz to 22kHz.

DSP is the change that matters most on paper. It is the first time Kanto has put digital signal processing in the Yu series, and the company says it improves crossover behaviour, driver integration and overall frequency response. A higher-powered amplifier platform gives both models greater headroom, and revised cabinet geometry is meant to keep the sound consistent across a wider listening area.
Connectivity has been modernised in the ways that count. USB-C and optical inputs support up to 24-bit/96kHz, Bluetooth is now 5.3 — but with SBC and AAC only, so aptX is gone, a quiet step back for Android listeners. A 3.5mm auxiliary input stays, as does the RCA input with its switchable phono preamplifier, and the subwoofer output now applies automatic 80Hz high-pass and low-pass filtering. A separate USB-C charging output is rated at 5V/1.5A. The active speaker position is now swappable, where the originals fixed it on the left. USB-C handles a computer directly — I reviewed the iFi ZEN Air DAC 2 at $129 for setups that need a separate DAC.

The cabinets come in five finishes — Black, White, Walnut, Ice Blue and Green — with revised proportions closer to the TUK series’ design language. The Yu6 G2 measures 6.9 by 8.4 by 10.7 inches per speaker; the Yu4 G2 is 5.5 by 8.1 by 9.2 inches. A remote is included.
Context
The Yu series goes back to 2014, and the original Yu4 and Yu6 arrived in early 2017. The original Yu6 sold for $399, so the G2 asks $150 more — the DSP and new drivers are what has to justify it. The new models were previewed at AXPONA in April 2026 and shown at HIGH END Vienna in June, part of a broader overhaul that also brought the TUK Grand flagship and a second-generation TUK.
The phono preamp is the feature that made the originals a staple for vinyl-first buyers, and it is still here. With USB-C now added, one pair of G2s covers a turntable, a TV and a computer without extra boxes. I reviewed the Audio-Technica AT-LPA2 turntable, which would plug straight into the Yu6 G2’s phono input.

Compared
| Speaker | Price | Power | Key inputs | Sub-out |
|---|---|---|---|---|
| Kanto Yu6 G2 | $549.99 | 130W RMS | USB-C, optical, Bluetooth 5.3, phono | Yes, auto 80Hz filter |
| Edifier S1000MKII | $499.99 | 120W RMS total | Bluetooth aptX HD, optical, coaxial, line-in | No |
| KEF LSX II LT | $999.99 | 200W total | Wi-Fi, AirPlay 2, Google Cast, Bluetooth | No |
| Fluance Ai61 | $349.99 | 120W | USB-C, optical, Bluetooth 5, RCA | Yes |
The Edifier S1000MKII is the closest rival at $499.99, with a larger 5.5-inch aluminium woofer and aptX HD Bluetooth, but no phono input, no USB-C and no subwoofer output. The KEF LSX II LT costs nearly twice as much at $999.99 for streaming and the Uni-Q driver, but no phono input and no subwoofer output. The Fluance Ai61 is the budget alternative at $349.99 — up from its $299.99 launch price — with a 6.5-inch woofer, USB-C and a subwoofer output.
My Take
This is a paper analysis. No independent review or measurement of the Yu6 G2 or Yu4 G2 exists yet, and I have not heard them.
The DSP is the real story here, not the power figure. Thirty per cent more RMS power sounds like a lot, but 100W to 130W is a modest step — the DSP tuning, if it does what Kanto claims, is what could actually change how these sound. The aptX removal is a genuine step back; SBC and AAC are fine for casual listening, but aptX was a selling point of the originals. The $150 rise over the original Yu6’s $399 is the other thing to weigh.
The passive versions may be the smarter buy of the four: at $349.99 and $249.99 they bring the new cabinet and drivers to anyone who already owns an amplifier. The powered models make their case on convenience — one box, every input, no amp shopping. The G2 also arrives into a market where Klipsch’s The Fives II now costs $1,399.99, leaving Kanto’s price band unusually empty; the Yu6 G2’s real competition sits below it, not above it.
Who Should Watch
Vinyl-first buyers building a first system should watch this first: a turntable, a pair of Yu6 G2s and nothing else is a complete setup; the Yu4 G2 does the same job on a desk. Anyone replacing an ageing pair of original Yu speakers should wait for an independent measurement — the power bump alone is not a reason to spend $549.99.
Everyone else should pause. If you already own a good amplifier, look at the passive Yu6 G2 at $349.99 before the powered version. North American sales start November 16, with international availability in mid-December; passive UK, EU and Australian pricing is still unconfirmed.











































